The best miter saw stand is a shrewd investment.
It’s possible to construct a DIY stand on your own. There is a good chance you’ve already used one, so you’ll know it’s not a great idea.
Ultimately, you need a strong and stable surface to work on. You need to ensure you do everything within your power to make sure your cuts are accurate. It’s just plain awkward using a makeshift one too.
The Best Miter Saw Stands On The Market
Don’t run out and grab anything you can get your hands on. If you spend a little time looking around there are a few amazing miter saw stands on the market. We’re going to discuss some of the best ones right now.
- DeWalt DWX726
- Bosch T4B
- DeWalt DWX723
- BORA Portamate PM-4000
1 – DeWalt DWX726 Miter Saw Stand
- Easily Adjustable Mounting Rails
- Durable Tubular Steel Construction
- Straightforward One-Time Assembly
- Pneumonic Assisted Raising + Lowering
- Extra Large Rubber Wheels
Support is the number one thing you need to look at when it comes to miter saw stands. It will give you a lot more versatility going forwards. Anyone who has used DeWalt tools in the past knows they excel in this area. Here are a few reasons why the DeWalt DWX726 stand comes in handy:
- Weight Capacity
- Material Support
- Adjustable Rails
Weight Capacity – You need a rolling saw stand with a huge weight capacity. Think about all the weight it will be required to support. Miter saws aren’t exactly the smallest power tools in the world, especially if you choose a big one. Some models are so heavy you’ll have a hard time picking them up.
Your folding saw stand will need to support the full weight of the materials you’ll place on it too. If not, there is a chance everything will come crashing down while you’re working. It’s a huge safety risk you can avoid by making sure you choose a steel saw stand with an adequate weight capacity.
The DeWalt DWX726 can handle 300 pounds, which is more than you’ll ever need.
Material Support – Do you remember talking about levers in physics class? In theory, you could tip a house over on your own. If the lever was long enough you wouldn’t need to apply too much pressure. Let’s say you balance a 100 foot pole on a mobile saw stand.
Even if the pole weighs less than 300 pounds your portable stand will fall when you push down on one end. The DeWalt miter saw stand with wheels can support material up to 8 feet long. If you plan on cutting anything longer you’ll need to set up extra support before anything goes wrong.
Adjustable Rails – A DeWalt compact miter saw stand come with adjustable mounting rails too. It means your miter saw table will be able to support models from any brand. You don’t need a DeWalt model even though they’re some of the best in the world.
It should be easy to move your portable saw stand around. It’s possible to break this down into a few different categories. Here are some of the main reasons why the DeWalt miter stand sticks out:
- Assisted Raising + Lowering
- Wide Rubber Grip Wheels
- Folds Down For Transportation
Assisted Raising + Lowering – Moving a portable saw stand around includes moving it up and down. When a heavy saw is sitting on it things could get tough. But the DeWalt DWX726 comes with three-position pneumatic assisted raising and lowering to ease your pain.
Basically, one touch of a lever allows your adjustable saw stand to shoot up straight away. The feature also stops your stand from dropping like a rock when it comes to lowering it. Anyone with a little strength will be able to set everything up on their own.
Wide Rubber Grip Wheels – You will want to wheel your DeWalt work support stand around jobsites too. I’m sure you can imagine the kinds of environments you’ll be working in. Sometimes it can get very rough and bumpy, but the DeWalt DWX726 can handle it.
Wide rubber grip wheels help considerably. You’ll be able to roll them across everything without too much issues. A few small rocks aren’t going to get in your way. Nothing will slide when you’re moving in slippery conditions, but make sure you position your tool in a safe area.
Folds Down For Transportation – Everything will fold vertically when you’re ready to put your rolling miter saw stand away. Not only will you be able to transport it from jobsite to jobsite, but it can be stored without taking up too much space in your workshop.
The DeWalt DWX726 miter stand weighs a manageable 67 pounds, but it feels a lot lighter to pull around when it’s at an angle.
- Tool Width (Extended) = 98 inches
- Tool Width (Extended) = 32.2 inches
- Tool Height (Folded) = 59.5 inches
- Tool Height (Folded) = 17 inches
- Tool Weight = 67 pounds
2 – Bosch T4B Miter Saw Stand
- Extra Large Material Support Capacity
- Adjustable Telescoping Leveling Leg
- Large 8 Inch Pneumatic Wheels
- Patented Gravity Rise System
- Rapid Release Tool Mounts
How many times have you complained about adjustable miter saw stands in the past? The Bosch T4B Gravity-Rise miter saw stand should finally put those problems to bed. Let’s look at some major issues you’ve faced and why they won’t be a problem any more:
- Extra Large Material
- Uneven Worksurfaces
- Problematic Terrain
Extra Large Material – When it comes to weight capacity most work stands will handle anything you can throw at them, including the Bosch T4B Gravity-Rise stand. Unfortunately, it’s not the same when it comes to support over a large distance.
The majority of them will tip when you put anything too long on top, but the Bosch T4B is extra special. It has a total material support capacity of 18 feet, which is roughly 3 times the length of you. I doubt you’ll find yourself working with anything longer.
Uneven Worksurfaces – There might be uneven ground in the area you’re working in. Imagine how much time you’ll waste if you need to position your extendable miter saw stand far away from where the action is taking place. Feel free to park the Bosch miter saw stand right beside you.
It comes with adjustable telescoping leveling feet that will give you maximum stability on uneven surfaces. Set everything up properly and working in harsh conditions will feel like working on flat land. It should only take you a few seconds to make any adjustments.
Problematic Terrain – It’s likely you’ll need to pull your universal miter saw stand through problematic terrain before reaching your final destination. Some rolling saw stands will fall over when faced with rocks, but your Bosch T4B will be able to handle anything thrown at it.
It’s because the stand comes with integrated 8 inch wheels. Not only will your solid rubber tires roll over everything, but they won’t be able to go flat. Also, you’ll be able to move the adjustable steel miter saw stand around even when a heavy tool is fastened to it.
The Bosch T4B is packed with even more features you’ll love. Let’s take a look at everything you’ll be getting when you open the box:
- Gravity-Rise System
- Rapid Release Tool Mounts
- Pull Out Work Stops
Gravity-Rise System – When Bosch released the Gravity-Rise system it blew everyone away. Suddenly, portable miter saw stands were a million times easier to operate. Once you touch a lever your stand will practically raise and lower itself in seconds.
Rapid Release Tool Mounts – It won’t take long to attach your compound miter saw to the Bosch T4B. Not only will the rapid release tool mounts let you speed things up, but they’ll also ensure your tool stays in position even when you’re transporting it around worksites.
Need to lower it 45 degrees to squeeze through a door? Everything is going to stay perfectly positioned. Also, it’s worth noting the mounts are universal, so the Bosch T4B works will almost every other miter saw on the market.
Pull Out Work Stops – On occasion you’ll need to perform the exact same tasks over and over again without moving your tool. Bosch decided to add a feature which will help you out. The universal miter saw stand comes with pull out work stops you can access directly in front of you.
They will help hold your material in position when you need to carry out repetitive tasks. It’s ideal when using a miter saw that doesn’t offer similar benefits. Once you’re finished you’ll be able to tuck them out of your way.
- Tool Heights = 48.42 inches
- Tool Width = 27.75 inches
- Tool Length = 51.5 inches
- Tool Length (Extended) = 103.15 inches
- Tool Weight = 76.7 pounds
- Material Capacity = 16 feet
3 – DeWalt DWX723 Miter Saw Stand
- Massive Weight + Material Capacity
- Leg Lock Levers For Fast Set Up
- Non-Marring Feet Protect Flooring
- Very Light Aluminium Construction
- Work Stops Positioned Anywhere
I know you won’t be able to wheel the DeWalt DWX723 around your worksite. It’s impossible because the folding saw stand doesn’t actually come with any wheels, but don’t let that put you off. There is a reason why this model is extremely popular with professionals. Let’s look at some of the biggest benefits:
- Extremely Lightweight
- Comes With Non-Marring Feet
- Two Miter Saws At Once
Extremely Lightweight – Why would DeWalt release a long miter saw stand with no wheels if they already sell one you can push around? Some workers prefer these models for good reason. However, it does mean they’ll need to carry their saw and stand until it’s been set up.
Luckily, the DeWalt miter saw stand comes in at a measly 29 pounds. It’s actually made from aluminium instead of steel so it’s extremely lightweight. Anyone who works with tools will be able to carry it around without any difficulties and it’s easier to pass through tight spaces.
Comes With Non-Marring Feet – I don’t think we’ve actually talked about the fact you won’t always be working in horrible environments. It’s important to point out because you’ll be working indoors too.
In fact, sometimes you’ll be working on flooring so expensive you can’t afford to treat it without absolute respect. The DeWalt DWX723 has non-marring feet that won’t leave nasty marks on surfaces. It’s an impressive quality considering how much weight is placed on the legs.
Two Miter Saws At Once – There is a small chance you’ll be working with 2 compound miter saws. You don’t necessarily need to set up an extra aluminum miter saw stand. You’ll be able to squeeze another tool onto this one depending on the kind of work you’re doing.
We’ve covered the big differences so we’ll move onto some smaller ones. There are still lots of features packed into the DeWalt saw stand. Let’s quickly run through a list of them now:
- 500 Pound Weight Capacity
- Adjustable Work Stops
- Solid Extension Lock Levers
- Leg Lock Levers For Transport
- Universal Design
500 Pound Weight Capacity – This heavy duty miter saw stand can handle a whopping 500 pounds, which is impressive considering it’s made from aluminium. There is no way you’ll be able to overload it unless it’s intentional.
Adjustable Work Stops – In most cases, you won’t be using 2 compound sliding miter saws at the same time. That doesn’t mean you can’t take advantage of the space available. Adjustable work stops will let you position your tool anywhere on the rail.
Solid Extension Lock Levers – The DeWalt DWX723 supports up to 16 feet of material, but you will need to extend the rail. Solid lock levers will ensure it’s locked into position when you do. There is nothing more annoying than flimsy lock levers giving out on you.
Leg Lock Levers For Transport – Each leg on the miter saw workstation comes with a lock lever too. When you want to move it everything can be folded up within seconds. It hardly takes up any space once it’s been folded. This makes a huge difference when you don’t own a large workshop or van.
Universal Design – A universal design means it can be used with any compound miter saw you own. Everything will be locked into place and you won’t need to worry about anything going wrong.
- Tool Height (Extended) = 32 inches
- Tool Height (Folded) = 6 inches
- Tool Width (Extended) = 151 inches
- Tool Width (Folded) = 70 inches
- Tool Weight = 29 pounds
- Weight Capacity = 500 pounds
- Material Support = 16 feet
4 – BORA Portamate PM-4000 Miter Saw Stand
- Work Height Promotes Stability + Accuracy
- Great Weight Capacity + Material Support
- Quick To Set Up And Take Down
- Quick Attach Mounts To Change Tools
- An Optional Wheel Kit Available
The BORA Portamate PM-4000 is a cheap miter saw stand for anyone who wants a bargain. It comes with a lot of features you’ll find in more impressive models, but it’s easier on your wallet. Here are some of the big ones you’ll appreciate on the job:
- Work Height Is Ergonomic
- 500 Pound Weight Capacity
- Snap Pin Folding Legs
Work Height Is Ergonomic – When someone sits at a desk they can raise and lower their chair until it’s comfortable. It’s an essential feature to make sure people stay productive during the day. Unfortunately, you won’t see the kind of feature on extendable miter saw stands because it’s impractical.
It doesn’t mean it will feel awkward when using the BORA Portamate PM-4000. The portable miter saw table has been specially designed to sit exactly 36 inches off the ground, which is the perfect height for most people when it comes to comfort.
Plus, it comes with 2 big bonuses:
Stability + Accuracy
When you’re working at a comfortable height you’re less likely to apply any pressure to the mobile saw stand where you shouldn’t. You won’t lean on the tool and bring everything crashing down. You’ll also be perfectly positioned to ensure every cut you make is as accurate as possible.
500 Pound Weight Capacity – Sadly, the BORA Portamate PM-4000 doesn’t come with any features that let you park your adjustable saw stand on unstable land. I’d strongly recommend paying very close attention before using this kind of portable work stand anywhere.
But once it’s in the right place everything else will be fine. It comes with a 500 pound weight capacity, which should satisfy your needs even on the biggest jobs. It supports materials up to 10 feet long too. Pick up extra mounts and you can attach other tools to the universal miter saw stand.
Please Note: The BORA Portamate PM-4000 works with any brand on the market, but don’t attach anything bigger than a 12 inch sliding compound miter saw.
Snap Pin Folding Legs – By the time you’ve folded up the small saw stand you won’t be able to notice it. Once it’s broken down it will be exactly 43.5 x 20 x 6.5 inches in size. It won’t take up much space inside your workshop, plus in won’t waste valuable real estate in your vehicle.
You should be able to break everything down within 10 seconds. The snap pin folding legs makes it easy. You won’t waste any energy carrying the solid miter saw stand around because it only weighs 30 pounds, even though it’s made from heavy duty contractor grade materials.
- Tool Height (Extended) = 36 inches
- Tool Length (Extended) = 10 feet
- Folded Dimensions = 43.5 x 20 x 6.5 inches
- Tool Weight = 30 pounds
- Weight Capacity = 500 pounds
The BORA Portamate Is Upgradable
We’ve talked about everything you’ll get when you unbox your cheap portable saw stand, but you can take things to the next level. Are you desperate to own a folding saw stand with wheels? If so, you’ll be able to upgrade your new toy:
BORA Portamate PM-4004 Wheel Kit
There isn’t anything magical about the wheel kit. It comes with two 6 inch wheels you’ll be able to snap onto your stand in minutes. However, you will get all the benefits that come from owning a model you’ll be able to wheel around worksites.
Please Note: If you want to attach extra tools to your miter saw workstation look into the Portamate PM-7002 tool mounts. Each set will allow you to mount one extra machine.
Common Questions + Answers
Q. Will a miter saw stand help people with sore backs?
A. Anyone who works with big power tools tends to suffer from back problems at some point in life. Not only will a miter saw stand help those with back problems, but it can help prevent injuries too. Choose one with wheels and a pneumatic assisted system to help raise and lower the stand. It will minimize the amount of heavy lifting you’ll need to do.
Q. Can I use my miter saw stand anywhere?
A. Even though a foldable miter saw stand doesn’t take up too much space you shouldn’t use it in confined spaces. It will have a huge impact on the size of materials you can cut. If you can squeeze lumber into a small room your work environment could still become uncomfortable. You should also read your tool manual and follow any instructions.
Q. Why should I waste valuable money on a miter saw stand?
A. Surprisingly, miter saw stands will actually save you money in the long term for a couple of reasons. Firstly, you’ll be able to work much quicker. Getting more things done means more money. Also, your cuts will become a lot more accurate too. If you don’t mess up as often there will be less expensive materials to throw away.
The Best Miter Saw Stand For Your Workshop/Jobsite
Every stand we’ve looked at today will be able to handle your sliding compound miter saw. You just need to choose which one you like best. I know it’s not going to be easy because they’re all good. Start by deciding whether or not you want one with wheels then focus on other big features you like.